Product Range Product Tables
  • Single-piece casting manufactured from Ductile Iron BS EN 1563
    • Two EPDM sealing gaskets
    • Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
    • Meets Hydrostatic test pressures 
    • Couplings in 2-part epoxy finish to match the applicable system
    • Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)
    For more specifications please see the table below. Code number(s) for available products are: HD4095 & HD6095 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Single-piece casting manufactured from Ductile Iron BS EN 1563
    • Two EPDM sealing gaskets
    • Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
    • Meets Hydrostatic test pressures 
    • Couplings in 2-part epoxy finish to match the applicable system
    • Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)
    For more specifications please see the table below. Code number(s) for available products are: HS4095 & HS6095 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Below Ground Coated Adjustable Bracket finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4067, HD6067, HD8067 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Below Ground Inspection chamber -4 Branch, Rectangular door finished externally in a two part grey epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HD4482, HD6482, HD6682 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Below Ground Inspection chamber -2 Branch, Rectangular door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4481, HD6481, HD6681 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Below Ground Inspection chamber - 2 Branch, Round door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4480, HD6480, HD6680 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Below Ground Puddle Flange finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4078, HD6078, HD8078, HD10078 & HD12078 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Bolt on flange is supplied in two halves with stainless steel nuts and bolts. Designed to be bedded on "Denso" tape or similar, wrapped around the pipe to provide a watertight seal.
  • Below Ground plain grating. Code number(s) for available products are: HD8077 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Below Ground Solid cover. Code number(s) for available products are: HD8076 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Supplied with rubber seal and screws fitted.
  • Below Ground Gully inlet finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD6071 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Below Ground Bellmouth gully inlet with secured grating finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4071 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Below Ground Bellmouth gully inlet finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4070 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.

Go to Top