Coated Adjustable Bracket

• Suitable for both vertical and horizontal installations
• Elongated slot allowing vertical and lateral adjustments
• Designed specifically for cast iron pipework
• Reduces the need for stack support brackets

Halifax Bismat Bracket

May be used for vertical and horizontal installations

This patented bracket features:

• Unique automatic locking system
• Captivated combi slot locking screw
• M8 / M10 tapped bosses on 50mm – 100mm dia’s.
• M10 tapped boss on 150mm – 200mm dia’s.
• Zinc plated construction with ageing resistant EPDM rubber lining

Zinc Plated Heavy Duty Bossed Bracket

Available in zinc plated finish unlined as standard for pipe sizes 50mm – 200mm. Also available rubber lined – see image below.

This bracket features:

• 2 No M8 locking screws on sizes 50mm to 100mm
• 2 No M10 locking screws on sizes 150mm to 200mm
• M8 / 10 tapped boss on size 50mm
• M10 /12 tapped boss on sizes 70mm – 200mm
• Can be fixed both horizontal and vertical

Zinc Plated Rubber Lined Heavy Duty Bossed Bracket

Available in zinc plated finish unlined as standard for pipe sizes 50mm – 200mm. Also available rubber lined – see image below.

This bracket features:

• 2 No M8 locking screws on sizes 50mm to 100mm
• 2 No M10 locking screws on sizes 150mm to 200mm
• M8 / 10 tapped boss on size 50mm
• M10 /12 tapped boss on sizes 70mm – 200mm
• Can be fixed both horizontal and vertical

Zinc Plated Split Band Clips

Designed for use on horizontal installations with 2 drop rods fixed into concrete slab

This bracket features:

• Two part band in a zinc plated finish
• Supplied with locking nuts and bolts

Stack Support Bracket with Gasket

Ductile iron bracket used in conjunction with stack support pipe and zinc plated cantilever bracket – see installation above ground section.

Galvanised Cantilever Arms

Stack Support Console Bracket

• Supplied as standard with guidance clamp illustrated
• EPDM rubber age resistant gaskets
• Sound insulating lining tested DIN4109

Accessories

Halifax Fix Connector

Reducing connector for jointing small diameter waste pipes of unequal diameter or dissimilar material:

• Manufactured to DIN 4060 for use up to 0.5 bar internal pressure
• No noise transmission from pipe to pipe
• Closure ring in EPDM rubber
• Hose clip made of stainless steel
• Slotted hexagon head locking screw
• Lubricant should be used during assembly

Zinc Plated Wall Plate

M10 female BSPT

Zinc Plated Thread Adaptor

M10 male x M12 Female BSPT

Ratchet Spanner

½” drive

Socket for Access Door Bolts

Allen Socket Adaptors (for couplings)

6mm for all ductile iron couplings plus 50mm – 150mm stainless steel couplings

8mm for 200mm dia stainless steel couplings

Hex Allen Key

For coupling continuity grub screw