Single-piece casting manufactured from Ductile Iron BS EN 1563

• Two EPDM sealing gaskets
• Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
• Meets Hydrostatic test pressures 
• Couplings in 2-part epoxy finish to match the applicable system
• Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)

For more specifications please see the table below. Code number(s) for available products are: HD4095 & HD6095 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground Inspection chamber -2 Branch, Rectangular door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4481, HD6481, HD6681 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground Puddle Flange finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4078, HD6078, HD8078, HD10078 & HD12078 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Bolt on flange is supplied in two halves with stainless steel nuts and bolts. Designed to be bedded on "Denso" tape or similar, wrapped around the pipe to provide a watertight seal. Print these details

Below Ground Bellmouth gully inlet finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4070 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground 88° Double Branch - radius curve finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4038, HD6038 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground Trap - with bottom access finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4050, HD6050 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground 45° Single Equal and Unequal Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4028, HD6026, HD6027, HD8026, HD8027, HD8028, HD10028 & HD12028 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground 69° Double Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4035 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details