Single-piece casting manufactured from Ductile Iron BS EN 1563

• Two EPDM sealing gaskets
• Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
• Meets Hydrostatic test pressures 
• Couplings in 2-part epoxy finish to match the applicable system
• Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)

For more specifications please see the table below. Code number(s) for available products are: HD4095 & HD6095 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground Inspection chamber -4 Branch, Rectangular door finished externally in a two part grey epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HD4482, HD6482, HD6682 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground Puddle Flange finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4078, HD6078, HD8078, HD10078 & HD12078 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Bolt on flange is supplied in two halves with stainless steel nuts and bolts. Designed to be bedded on "Denso" tape or similar, wrapped around the pipe to provide a watertight seal. Print these details

Below Ground Bellmouth gully inlet finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4070 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground Trap - with bottom access finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4050, HD6050 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground 88° Double Branch - radius curve finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4038, HD6038 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground 88° Single Branch - Radius curve with access finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4032, HD6032, HD6033 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground 69° Single Equal and Unequal Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4025, HD6023 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground 88° Long Radius Bend - Door Back finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4011, HD6011 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground 15° Short Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4007, HD6007 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details

Below Ground Ductile Iron Coupling finished externally in a two part grey epoxy coating.

• Two piece coupling manufactured from ductile iron BS EN 1563
• Zinc plated socket cap locking screw and nut M8 for 100 – 300mm (6mm Allen Drive)
• 2 locking screws on 100mm and 4 locking screws on 150mm - 300mm dia’s
• EPDM synthetic rubber sealing ring
• Pressure rating up to 0.5 bar unrestrained
• Below ground soil couplings coated in 2 part epoxy finish grey colour

Code number(s) for available products are: HD4012, HD6012, HD8012, HD10012 & HD12012 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Print these details