-
Above Ground 88° Single Branch - Radius Curve With Access finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4032, HS6032, HS6033 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Access pipe - round door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4043, HD6043 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Double Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4034 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Access pipe - rectangular door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4049, HD6049, HD8049, HD10049 & HD12049 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 69° Double Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4035 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 45° Double Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4036, HS6036, HS6037, HS8036 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Trap - with bottom access finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4050, HD6050 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Double Branch - Radius Curve finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4038, HS6038 -
Below Ground Blank end finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4051, HD6051, HD8051, HD10051 & HD12051 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Single Branch - Long Tail finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4040 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Blank end - drilled and tapped finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4052, HD6052 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Long Tail 4 Boss Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4059 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Bellmouth gully inlet finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4070 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Corner Branch - Long Tail finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4041 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Bellmouth gully inlet with secured grating finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4071 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Corner Branch - Short Tail finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4042 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Gully inlet finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD6071 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Access Pipe - Round Door finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2043, HS3034, HS4043, HS6043 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Access Pipe - Rectangular Door finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4049, HS6049, HS8049, HS10049 & HS12049 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Offset finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4044, HS2045, HS3045, HS4045 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Puddle Flange finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4078, HD6078, HD8078, HD10078 & HD12078 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Bolt on flange is supplied in two halves with stainless steel nuts and bolts. Designed to be bedded on "Denso" tape or similar, wrapped around the pipe to provide a watertight seal. -
Below Ground Inspection chamber - 2 Branch, Round door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4480, HD6480, HD6680 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Pipe Taper finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS3046, HS4046, HS4047, HS6046, HS6047, HS6048, HS8046, HS8047, HS10046, HS10047, HS10048, HS12046, HS12047 & HS12048 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Inspection chamber -2 Branch, Rectangular door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4481, HD6481, HD6681 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Trap - With bottom Access finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2050, HS3050, HS4050, HS6050 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Blank End finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2051, HS3051, HS4051, HS6051, HS8051, HS10051 & HS12051 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Inspection chamber -4 Branch, Rectangular door finished externally in a two part grey epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HD4482, HD6482, HD6682 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Blank End - Drilled And Tapped finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4052, HS6052 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Coated Adjustable Bracket finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4067, HD6067, HD8067 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Single Boss Pipe 2" BSPT finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS3053, HS4053, HS6053 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Double Boss Pipe 2 x 2" BSPT - Opposed finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4054 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Double Boss Pipe 2 x 2" BSPT - At 90˚ finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4055 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Single Compression Fit Boss Pipe finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS3090, HS4090, HS6090 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Stack Support Pipe finished externally in a two part red epoxy coating and fully compliant with BS EN 877:1999 + A1:2006. For more specifications please see the table below. Code number(s) for available products are: HS3056, HS4056, HS6056, HS8056 -
Above Ground Stack Support Pipe Bracket. Ductile iron bracket used in conjunction with stack support pipe and zinc plated cantilever bracket For more specifications please see the table below. Code number(s) for available products are: HS3057, HS4057, HS6057, HS8057 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Halifax Grip. For more specifications please see the table below.- Axial restraint safety clamp for use with rapid connect coupling
- Ensures integrity on pipelines subject to accidental back pressure
- Hardened grip ring insert
- 50mm – 100mm up to 10 bar pressure rating
- 150mm provides up to 5 bar
- 200mm provides up to 3 bar
- Manufactured from zinc plated steel with fitted socket cap screws
|
|
|
|---|