- 2 No M8 locking screws on sizes 50mm to 100mm
- 2 No M10 locking screws on sizes 150mm to 200mm
- M8 / 10 tapped boss on size 50mm
- M10 /12 tapped boss on sizes 70mm – 200mm
- Can be fixed both horizontal and vertical
-
Above Ground Halifax Heavy Duty Bossed Bracket Lined. For more specifications please see the table below. Available in zinc plated finish for pipe sizes 50mm – 200mm. This bracket features: -
Above Ground Halifax Heavy Duty Bossed Bracket Unlined. Available in zinc plated finish unlined as standard for pipe sizes 50mm – 200mm. This bracket features:- 2 No M8 locking screws on sizes 50mm to 100mm
- 2 No M10 locking screws on sizes 150mm to 200mm
- M8 / 10 tapped boss on size 50mm
- M10 /12 tapped boss on sizes 70mm – 200mm
- Can be fixed both horizontal and vertical
-
Above Ground Halifax High Performance Coupling.- Fully re-usable axial restraint pipe coupling system for use in sensitive areas eg. computer rooms and where there may be a risk of excessive back pressure
- Up to 10 bar internal pressure
- Casing 304 stainless steel, no spot welding
- 2 alloy steel zinc PTFE coated locking screws on all sizes
- EPDM gasket with stainless steel anchor teeth
-
Above Ground Halifax Split Band Clip. For more specifications please see the table below. Designed for use on horizontal installations with 2 drop rods fixed into concrete slab This bracket features:- Two part band in a zinc plated finish
- Supplied with locking nuts and bolts
-
Below Ground Inspection chamber -2 Branch, Rectangular door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4481, HD6481, HD6681 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Inspection chamber - 2 Branch, Round door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4480, HD6480, HD6680 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Inspection chamber -4 Branch, Rectangular door finished externally in a two part grey epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HD4482, HD6482, HD6682 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Offset finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4044, HS2045, HS3045, HS4045 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Pipe Taper finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS3046, HS4046, HS4047, HS6046, HS6047, HS6048, HS8046, HS8047, HS10046, HS10047, HS10048, HS12046, HS12047 & HS12048 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Puddle Flange finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4078, HD6078, HD8078, HD10078 & HD12078 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Bolt on flange is supplied in two halves with stainless steel nuts and bolts. Designed to be bedded on "Denso" tape or similar, wrapped around the pipe to provide a watertight seal. -
Single-piece casting manufactured from Ductile Iron BS EN 1563- Two EPDM sealing gaskets
- Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
- Meets Hydrostatic test pressures
- Couplings in 2-part epoxy finish to match the applicable system
- Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)
-
Single-piece casting manufactured from Ductile Iron BS EN 1563- Two EPDM sealing gaskets
- Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
- Meets Hydrostatic test pressures
- Couplings in 2-part epoxy finish to match the applicable system
- Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)