-
Above Ground Double Spigot Pipe finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2001, HS3001, HS4001, HS6001, HS8001, HS10001 & HS12001 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Double Spigot Pipe finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4001, HD6001, HD8001, HD10001 & HD12001 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Ductile Iron Coupling finished externally in a two part grey epoxy coating.- Two piece coupling manufactured from ductile iron BS EN 1563
- Zinc plated socket cap locking screw and nut M8 for 100 – 300mm (6mm Allen Drive)
- 2 locking screws on 100mm and 4 locking screws on 150mm - 300mm dia’s
- EPDM synthetic rubber sealing ring
- Pressure rating up to 0.5 bar unrestrained
- Below ground soil couplings coated in 2 part epoxy finish grey colour
-
Above Ground Stainless Steel (Grade 430ti) Coupling.- Clamping unit/collar manufactured from ferritic stainless steel AISI 430 Ti
- 50mm – 150mm: M8 zinc plated socket cap screw and nut (6mm Allen Drive)
- 200mm: M10 zinc plated socket cap screw and nut (8mm Allen Drive)
- EPDM synthetic rubber sealing ring
- Block tightening provides visible torque control
- Pressure rated up to 0.5 bar unrestrained
- Quick Fitting
- Suitable for re-use
- Conforms to the requirements of BS EN 877
-
Below Ground 45° Short Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4005, HD6005, HD8005, HD10005 & HD12005 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Ductile Iron Coupling finished externally in a two part red epoxy coating.- Two piece coupling manufactured from ductile iron BS EN 1563
- Zinc plated socket cap locking screw and nut M8 for 50 – 300mm (6mm Allen Drive)
- 2 locking screws on 50 – 100mm and 4 locking screws on 150mm - 300mm dia’s
- EPDM synthetic rubber sealing ring
- Pressure rating up to 0.5 bar unrestrained
- Above ground soil couplings coated in 2 part epoxy finish red colour
-
Above Ground 88° Short Radius Bend finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2003, HS3003, HS4003, HS6003, HS8003, HS10003 & HS12003 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 45° Short Radius Bend finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2005, HS3005, HS4005, HS6005, HS8005, HS10005 & HS12005 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 45° Single Equal and Unequal Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4028, HD6026, HD6027, HD8026, HD8027, HD8028, HD10028 & HD12028 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Single Equal And Unequal Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2020, HS3020, HS3021, HS4020, HS4021, HS4022, HS6020, HS6021, HS8020, HS10020 & HS12020 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 45° Double Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4036, HD6036, HD6037, HD8036 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 45° Single Equal And Unequal Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2026, HS3026, HS3027, HS4026, HS4027, HS4028, HS6026, HS6027, HS6028, HS8026, HS8027, HS10028 & HS12028 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Access pipe - rectangular door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4049, HD6049, HD8049, HD10049 & HD12049 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Pipe Taper finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD6048, HD8046, HD8047, HD10046, HD10047, HD10048, HD12046, HD12047 & HD12048 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 45° Double Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4036, HS6036, HS6037, HS8036 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Blank end finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4051, HD6051, HD8051, HD10051 & HD12051 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Solid cover. Code number(s) for available products are: HD8076 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Supplied with rubber seal and screws fitted. -
Above Ground Access Pipe - Rectangular Door finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4049, HS6049, HS8049, HS10049 & HS12049 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground plain grating. Code number(s) for available products are: HD8077 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Puddle Flange finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4078, HD6078, HD8078, HD10078 & HD12078 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Bolt on flange is supplied in two halves with stainless steel nuts and bolts. Designed to be bedded on "Denso" tape or similar, wrapped around the pipe to provide a watertight seal. -
Above Ground Pipe Taper finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS3046, HS4046, HS4047, HS6046, HS6047, HS6048, HS8046, HS8047, HS10046, HS10047, HS10048, HS12046, HS12047 & HS12048 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Blank End finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2051, HS3051, HS4051, HS6051, HS8051, HS10051 & HS12051 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Coated Adjustable Bracket finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4067, HD6067, HD8067 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Stack Support Pipe finished externally in a two part red epoxy coating and fully compliant with BS EN 877:1999 + A1:2006. For more specifications please see the table below. Code number(s) for available products are: HS3056, HS4056, HS6056, HS8056 -
Above Ground Stack Support Pipe Bracket. Ductile iron bracket used in conjunction with stack support pipe and zinc plated cantilever bracket For more specifications please see the table below. Code number(s) for available products are: HS3057, HS4057, HS6057, HS8057 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Halifax Grip. For more specifications please see the table below.- Axial restraint safety clamp for use with rapid connect coupling
- Ensures integrity on pipelines subject to accidental back pressure
- Hardened grip ring insert
- 50mm – 100mm up to 10 bar pressure rating
- 150mm provides up to 5 bar
- 200mm provides up to 3 bar
- Manufactured from zinc plated steel with fitted socket cap screws
-
Halifax Bismat Bracket. For more specifications please see the table below. May be used for vertical and horizontal installations. This patented bracket features:- Unique automatic locking system
- Captivated combi slot locking screw
- M8 / M10 tapped bosses on 50mm – 100mm dia’s.
- M10 tapped boss on 150mm – 200mm dia’s.
- Zinc plated construction with ageing resistant EPDM rubber lining
-
Above Ground Halifax Heavy Duty Bossed Bracket Unlined. Available in zinc plated finish unlined as standard for pipe sizes 50mm – 200mm. This bracket features:- 2 No M8 locking screws on sizes 50mm to 100mm
- 2 No M10 locking screws on sizes 150mm to 200mm
- M8 / 10 tapped boss on size 50mm
- M10 /12 tapped boss on sizes 70mm – 200mm
- Can be fixed both horizontal and vertical
-
Above Ground Halifax Heavy Duty Bossed Bracket Lined. For more specifications please see the table below. Available in zinc plated finish for pipe sizes 50mm – 200mm. This bracket features:- 2 No M8 locking screws on sizes 50mm to 100mm
- 2 No M10 locking screws on sizes 150mm to 200mm
- M8 / 10 tapped boss on size 50mm
- M10 /12 tapped boss on sizes 70mm – 200mm
- Can be fixed both horizontal and vertical
-
Above Ground Halifax Split Band Clip. For more specifications please see the table below. Designed for use on horizontal installations with 2 drop rods fixed into concrete slab This bracket features:- Two part band in a zinc plated finish
- Supplied with locking nuts and bolts
-
Above Ground Halifax High Performance Coupling.- Fully re-usable axial restraint pipe coupling system for use in sensitive areas eg. computer rooms and where there may be a risk of excessive back pressure
- Up to 10 bar internal pressure
- Casing 304 stainless steel, no spot welding
- 2 alloy steel zinc PTFE coated locking screws on all sizes
- EPDM gasket with stainless steel anchor teeth
-
Above Ground Stack Support Console With Guidance Clamp. For more specifications please see the table below.- Supplied as standard with guidance clamp illustrated
- EPDM rubber age resistant gaskets
- Sound insulating lining tested DIN4109
-
Above Ground Coated Adjustable Bracket finished externally in a two part red epoxy coating.- Suitable for both vertical and horizontal installations
- Elongated slot allowing vertical and lateral adjustments
- Designed specifically for cast iron pipework
- Reduces the need for stack support brackets
|
|
|
|---|