- Fully re-usable axial restraint pipe coupling system for use in sensitive areas eg. computer rooms and where there may be a risk of excessive back pressure
- Up to 10 bar internal pressure
- Casing 304 stainless steel, no spot welding
- 2 alloy steel zinc PTFE coated locking screws on all sizes
- EPDM gasket with stainless steel anchor teeth
-
Above Ground Halifax High Performance Coupling. -
Above Ground Wall Plate: Type 670. M10 female BSPT. For more specifications please see the table below. Code number(s) for available products are: HSD6702, HSD6711 *Not covered by EN877 standard, Kitemark or Agrément certificate -
Above Ground Thread Adaptor. M10 male x M12 Female BSPT. For more specifications please see the table below. Code number(s) for available products are: HSD10/12 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Galvanised Cantilever Arms. For more specifications please see the table below. Code number(s) for available products are: HSD1830, HSD1845 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Rapid Strut Cantilever Arms. For more specifications please see the table below. Code number(s) for available products are: HSD1846 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Stack Support Console With Guidance Clamp. For more specifications please see the table below.- Supplied as standard with guidance clamp illustrated
- EPDM rubber age resistant gaskets
- Sound insulating lining tested DIN4109
-
Above Ground Stainless Steel Bracket Dampener. For more specifications please see the table below. Code number(s) for available products are: HSD6703 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Coated Adjustable Bracket finished externally in a two part red epoxy coating.- Suitable for both vertical and horizontal installations
- Elongated slot allowing vertical and lateral adjustments
- Designed specifically for cast iron pipework
- Reduces the need for stack support brackets
-
Below Ground Double Spigot Pipe finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4001, HD6001, HD8001, HD10001 & HD12001 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Ductile Iron Coupling finished externally in a two part grey epoxy coating.- Two piece coupling manufactured from ductile iron BS EN 1563
- Zinc plated socket cap locking screw and nut M8 for 100 – 300mm (6mm Allen Drive)
- 2 locking screws on 100mm and 4 locking screws on 150mm - 300mm dia’s
- EPDM synthetic rubber sealing ring
- Pressure rating up to 0.5 bar unrestrained
- Below ground soil couplings coated in 2 part epoxy finish grey colour
-
Below Ground 45° Short Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4005, HD6005, HD8005, HD10005 & HD12005 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 30° Short Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4006, HD6006 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 15° Short Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4007, HD6007 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Long Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4008, HD6008 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 22° Long Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4009 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Long Radius Bend - Door Back finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4011, HD6011 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Long Radius Bend - Heel Rest finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4014, HD6014 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 45° medium radius bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4015, HD6015 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 69° Single Equal and Unequal Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4025, HD6023 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 45° Single Equal and Unequal Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4028, HD6026, HD6027, HD8026, HD8027, HD8028, HD10028 & HD12028 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Single Branch - Radius curve finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4030, HD6030, HD6031 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Single Branch - Radius curve with access finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4032, HD6032, HD6033 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 69° Double Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4035 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 45° Double Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4036, HD6036, HD6037, HD8036 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.