Products
-
Above Ground Double Spigot Pipe finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2001, HS3001, HS4001, HS6001, HS8001, HS10001 & HS12001 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Stainless Steel (Grade 430ti) Coupling.- Clamping unit/collar manufactured from ferritic stainless steel AISI 430 Ti
- 50mm – 150mm: M8 zinc plated socket cap screw and nut (6mm Allen Drive)
- 200mm: M10 zinc plated socket cap screw and nut (8mm Allen Drive)
- EPDM synthetic rubber sealing ring
- Block tightening provides visible torque control
- Pressure rated up to 0.5 bar unrestrained
- Quick Fitting
- Suitable for re-use
- Conforms to the requirements of BS EN 877
-
Above Ground Ductile Iron Coupling finished externally in a two part red epoxy coating.- Two piece coupling manufactured from ductile iron BS EN 1563
- Zinc plated socket cap locking screw and nut M8 for 50 – 300mm (6mm Allen Drive)
- 2 locking screws on 50 – 100mm and 4 locking screws on 150mm - 300mm dia’s
- EPDM synthetic rubber sealing ring
- Pressure rating up to 0.5 bar unrestrained
- Above ground soil couplings coated in 2 part epoxy finish red colour
-
Single-piece casting manufactured from Ductile Iron BS EN 1563- Two EPDM sealing gaskets
- Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
- Meets Hydrostatic test pressures
- Couplings in 2-part epoxy finish to match the applicable system
- Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)
-
Above Ground 88° Short Radius Bend finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2003, HS3003, HS4003, HS6003, HS8003, HS10003 & HS12003 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 69° Short Radius Bend finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2004, HS3004, HS4004, HS6004 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 45° Short Radius Bend finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2005, HS3005, HS4005, HS6005, HS8005, HS10005 & HS12005 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 30° Short Radius Bend finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2006, HS3006, HS4006, HS6006 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 15° Short Radius Bend finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2007, HS3007, HS4007, HS6007 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Long Radius Bend finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4008, HS6008 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 22° Long Radius Bend finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4009 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Short Radius Bend - Door Back finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS3010, HS4010 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Long Radius Bend - Door Back finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4011, HS6011 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Bend - Long Tail finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4013 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Single Equal And Unequal Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2020, HS3020, HS3021, HS4020, HS4021, HS4022, HS6020, HS6021, HS8020, HS10020 & HS12020 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 69° Single Equal And Unequal Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2023, HS3023, HS3024, HS4023, HS4024, HS4025, HS6023 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 45° Single Equal And Unequal Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2026, HS3026, HS3027, HS4026, HS4027, HS4028, HS6026, HS6027, HS6028, HS8026, HS8027, HS10028 & HS12028 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Single Branch - Radius Curve finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4030, HS6030, HS6031 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Single Branch - Radius Curve With Access finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4032, HS6032, HS6033 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Double Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4034 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 69° Double Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4035 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 45° Double Branch finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4036, HS6036, HS6037, HS8036 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground 88° Double Branch - Radius Curve finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4038, HS6038 -
Above Ground 88° Single Branch - Long Tail finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4040 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.