- Two EPDM sealing gaskets
- Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
- Meets Hydrostatic test pressures
- Couplings in 2-part epoxy finish to match the applicable system
- Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)
Products
-
Single-piece casting manufactured from Ductile Iron BS EN 1563 -
Above Ground Galvanised Cantilever Arms. For more specifications please see the table below. Code number(s) for available products are: HSD1830, HSD1845 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Rapid Strut Cantilever Arms. For more specifications please see the table below. Code number(s) for available products are: HSD1846 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Stack Support Console With Guidance Clamp. For more specifications please see the table below.- Supplied as standard with guidance clamp illustrated
- EPDM rubber age resistant gaskets
- Sound insulating lining tested DIN4109
-
Above Ground Stainless Steel Bracket Dampener. For more specifications please see the table below. Code number(s) for available products are: HSD6703 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Coated Adjustable Bracket finished externally in a two part red epoxy coating.- Suitable for both vertical and horizontal installations
- Elongated slot allowing vertical and lateral adjustments
- Designed specifically for cast iron pipework
- Reduces the need for stack support brackets
-
Above Ground Wall Plate: Type 670. M10 female BSPT. For more specifications please see the table below. Code number(s) for available products are: HSD6702, HSD6711 *Not covered by EN877 standard, Kitemark or Agrément certificate -
Above Ground Thread Adaptor. M10 male x M12 Female BSPT. For more specifications please see the table below. Code number(s) for available products are: HSD10/12 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Stack Support Pipe Bracket. Ductile iron bracket used in conjunction with stack support pipe and zinc plated cantilever bracket For more specifications please see the table below. Code number(s) for available products are: HS3057, HS4057, HS6057, HS8057 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Halifax Grip. For more specifications please see the table below.- Axial restraint safety clamp for use with rapid connect coupling
- Ensures integrity on pipelines subject to accidental back pressure
- Hardened grip ring insert
- 50mm – 100mm up to 10 bar pressure rating
- 150mm provides up to 5 bar
- 200mm provides up to 3 bar
- Manufactured from zinc plated steel with fitted socket cap screws
-
Halifax Bismat Bracket. For more specifications please see the table below. May be used for vertical and horizontal installations. This patented bracket features:- Unique automatic locking system
- Captivated combi slot locking screw
- M8 / M10 tapped bosses on 50mm – 100mm dia’s.
- M10 tapped boss on 150mm – 200mm dia’s.
- Zinc plated construction with ageing resistant EPDM rubber lining
-
Above Ground Halifax Heavy Duty Bossed Bracket Unlined. Available in zinc plated finish unlined as standard for pipe sizes 50mm – 200mm. This bracket features:- 2 No M8 locking screws on sizes 50mm to 100mm
- 2 No M10 locking screws on sizes 150mm to 200mm
- M8 / 10 tapped boss on size 50mm
- M10 /12 tapped boss on sizes 70mm – 200mm
- Can be fixed both horizontal and vertical