Above Ground Pipe with Bracket Above Ground Products From access pipes to manifold connectors...

Products

  • Single-piece casting manufactured from Ductile Iron BS EN 1563
    • Two EPDM sealing gaskets
    • Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
    • Meets Hydrostatic test pressures 
    • Couplings in 2-part epoxy finish to match the applicable system
    • Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)
    For more specifications please see the table below. Code number(s) for available products are: HS4095 & HS6095 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Above Ground Coated Adjustable Bracket finished externally in a two part red epoxy coating.
    • Suitable for both vertical and horizontal installations
    • Elongated slot allowing vertical and lateral adjustments
    • Designed specifically for cast iron pipework
    • Reduces the need for stack support brackets
    For more specifications please see the table below. Code number(s) for available products are: HS2067, HS3067, HS4067, HS6067, HS8067 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Above Ground Stainless Steel Bracket Dampener. For more specifications please see the table below. Code number(s) for available products are: HSD6703 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Above Ground Stack Support Console With Guidance Clamp. For more specifications please see the table below.
    • Supplied as standard with guidance clamp illustrated
    • EPDM rubber age resistant gaskets
    • Sound insulating lining tested DIN4109
    Code number(s) for available products are: HS3070, HS4070, HS6070, HS8070 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Above Ground Rapid Strut Cantilever Arms. For more specifications please see the table below. Code number(s) for available products are: HSD1846 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Above Ground Galvanised Cantilever Arms. For more specifications please see the table below. Code number(s) for available products are: HSD1830, HSD1845 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Above Ground Thread Adaptor. M10 male x M12 Female BSPT. For more specifications please see the table below. Code number(s) for available products are: HSD10/12 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Above Ground Wall Plate: Type 670. M10 female BSPT. For more specifications please see the table below. Code number(s) for available products are: HSD6702, HSD6711 *Not covered by EN877 standard, Kitemark or Agrément certificate
  • Above Ground Halifax High Performance Coupling.
    • Fully re-usable axial restraint pipe coupling system for use in sensitive areas eg. computer rooms and where there may be a risk of excessive back pressure
    • Up to 10 bar internal pressure
    • Casing 304 stainless steel, no spot welding
    • 2 alloy steel zinc PTFE coated locking screws on all sizes
    • EPDM gasket with stainless steel anchor teeth
    For more specifications please see the table below. Code number(s) for available products are: HS2069, HS3069, HS4069, HS6069, HS8069 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Above Ground Halifax Fix Connector. Reducing connector for jointing small diameter waste pipes of unequal diameter or dissimilar material:
    • Manufactured to DIN 4060 for use up to 0.5 bar internal pressure
    • No noise transmission from pipe to pipe
    • Closure ring in EPDM rubber
    • Hose clip made of stainless steel
    • Slotted hexagon head locking screw
    • Lubricant should be used during assembly
    For more specifications please see the table below. Code number(s) for available products are: HS2068, HS3068, HS4068 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Above Ground Halifax Split Band Clip. For more specifications please see the table below. Designed for use on horizontal installations with 2 drop rods fixed into concrete slab This bracket features:
    • Two part band in a zinc plated finish
    • Supplied with locking nuts and bolts
    Code number(s) for available products are: HS2065, HS3065, HS4065, HS6065, HS8065 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.
  • Above Ground Halifax Heavy Duty Bossed Bracket Lined. For more specifications please see the table below. Available in zinc plated finish for pipe sizes 50mm – 200mm. This bracket features:
    • 2 No M8 locking screws on sizes 50mm to 100mm
    • 2 No M10 locking screws on sizes 150mm to 200mm
    • M8 / 10 tapped boss on size 50mm
    • M10 /12 tapped boss on sizes 70mm – 200mm
    • Can be fixed both horizontal and vertical
    Code number(s) for available products are: HS2064, HS3064, HS4064, HS6064, HS8064 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.

Go to Top