- Manufactured to DIN 4060 for use up to 0.5 bar internal pressure
- No noise transmission from pipe to pipe
- Closure ring in EPDM rubber
- Hose clip made of stainless steel
- Slotted hexagon head locking screw
- Lubricant should be used during assembly
-
Above Ground Halifax Fix Connector. Reducing connector for jointing small diameter waste pipes of unequal diameter or dissimilar material: -
Above Ground Halifax Grip. For more specifications please see the table below.- Axial restraint safety clamp for use with rapid connect coupling
- Ensures integrity on pipelines subject to accidental back pressure
- Hardened grip ring insert
- 50mm – 100mm up to 10 bar pressure rating
- 150mm provides up to 5 bar
- 200mm provides up to 3 bar
- Manufactured from zinc plated steel with fitted socket cap screws
-
Above Ground Halifax Heavy Duty Bossed Bracket Lined. For more specifications please see the table below. Available in zinc plated finish for pipe sizes 50mm – 200mm. This bracket features:- 2 No M8 locking screws on sizes 50mm to 100mm
- 2 No M10 locking screws on sizes 150mm to 200mm
- M8 / 10 tapped boss on size 50mm
- M10 /12 tapped boss on sizes 70mm – 200mm
- Can be fixed both horizontal and vertical
-
Above Ground Halifax Heavy Duty Bossed Bracket Unlined. Available in zinc plated finish unlined as standard for pipe sizes 50mm – 200mm. This bracket features:- 2 No M8 locking screws on sizes 50mm to 100mm
- 2 No M10 locking screws on sizes 150mm to 200mm
- M8 / 10 tapped boss on size 50mm
- M10 /12 tapped boss on sizes 70mm – 200mm
- Can be fixed both horizontal and vertical
-
Above Ground Halifax High Performance Coupling.- Fully re-usable axial restraint pipe coupling system for use in sensitive areas eg. computer rooms and where there may be a risk of excessive back pressure
- Up to 10 bar internal pressure
- Casing 304 stainless steel, no spot welding
- 2 alloy steel zinc PTFE coated locking screws on all sizes
- EPDM gasket with stainless steel anchor teeth
-
Above Ground Halifax Split Band Clip. For more specifications please see the table below. Designed for use on horizontal installations with 2 drop rods fixed into concrete slab This bracket features:- Two part band in a zinc plated finish
- Supplied with locking nuts and bolts
-
Above Ground Manifold Connector finished externally in a two part red epoxy coating and fully compliant with BS EN 877:1999 + A1:2006. For more specifications please see the table below. Code number(s) for available products are: HS4058 -
Above Ground Offset finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS4044, HS2045, HS3045, HS4045 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Pipe Taper finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS3046, HS4046, HS4047, HS6046, HS6047, HS6048, HS8046, HS8047, HS10046, HS10047, HS10048, HS12046, HS12047 & HS12048 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Single-piece casting manufactured from Ductile Iron BS EN 1563- Two EPDM sealing gaskets
- Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
- Meets Hydrostatic test pressures
- Couplings in 2-part epoxy finish to match the applicable system
- Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)
-
Above Ground Stainless Steel (Grade 430ti) Coupling.- Clamping unit/collar manufactured from ferritic stainless steel AISI 430 Ti
- 50mm – 150mm: M8 zinc plated socket cap screw and nut (6mm Allen Drive)
- 200mm: M10 zinc plated socket cap screw and nut (8mm Allen Drive)
- EPDM synthetic rubber sealing ring
- Block tightening provides visible torque control
- Pressure rated up to 0.5 bar unrestrained
- Quick Fitting
- Suitable for re-use
- Conforms to the requirements of BS EN 877
-
Above Ground Rapid Strut Cantilever Arms. For more specifications please see the table below. Code number(s) for available products are: HSD1846 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Single Boss Pipe 2" BSPT finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS3053, HS4053, HS6053 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Single Compression Fit Boss Pipe finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS3090, HS4090, HS6090 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Stack Support Console With Guidance Clamp. For more specifications please see the table below.- Supplied as standard with guidance clamp illustrated
- EPDM rubber age resistant gaskets
- Sound insulating lining tested DIN4109
-
Above Ground Stack Support Pipe finished externally in a two part red epoxy coating and fully compliant with BS EN 877:1999 + A1:2006. For more specifications please see the table below. Code number(s) for available products are: HS3056, HS4056, HS6056, HS8056 -
Above Ground Stack Support Pipe Bracket. Ductile iron bracket used in conjunction with stack support pipe and zinc plated cantilever bracket For more specifications please see the table below. Code number(s) for available products are: HS3057, HS4057, HS6057, HS8057 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Stainless Steel Bracket Dampener. For more specifications please see the table below. Code number(s) for available products are: HSD6703 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Thread Adaptor. M10 male x M12 Female BSPT. For more specifications please see the table below. Code number(s) for available products are: HSD10/12 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Trap - With bottom Access finished externally in a two part red epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HS2050, HS3050, HS4050, HS6050 Fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Above Ground Wall Plate: Type 670. M10 female BSPT. For more specifications please see the table below. Code number(s) for available products are: HSD6702, HSD6711 *Not covered by EN877 standard, Kitemark or Agrément certificate