Products
-
Below Ground Double Spigot Pipe finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4001, HD6001, HD8001, HD10001 & HD12001 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Ductile Iron Coupling finished externally in a two part grey epoxy coating.- Two piece coupling manufactured from ductile iron BS EN 1563
- Zinc plated socket cap locking screw and nut M8 for 100 – 300mm (6mm Allen Drive)
- 2 locking screws on 100mm and 4 locking screws on 150mm - 300mm dia’s
- EPDM synthetic rubber sealing ring
- Pressure rating up to 0.5 bar unrestrained
- Below ground soil couplings coated in 2 part epoxy finish grey colour
-
Below Ground 45° Short Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4005, HD6005, HD8005, HD10005 & HD12005 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Single-piece casting manufactured from Ductile Iron BS EN 1563- Two EPDM sealing gaskets
- Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
- Meets Hydrostatic test pressures
- Couplings in 2-part epoxy finish to match the applicable system
- Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)
-
Below Ground 30° Short Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4006, HD6006 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 15° Short Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4007, HD6007 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Long Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4008, HD6008 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 22° Long Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4009 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Long Radius Bend - Door Back finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4011, HD6011 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Long Radius Bend - Heel Rest finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4014, HD6014 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 45° medium radius bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4015, HD6015 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 69° Single Equal and Unequal Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4025, HD6023 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 45° Single Equal and Unequal Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4028, HD6026, HD6027, HD8026, HD8027, HD8028, HD10028 & HD12028 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Single Branch - Radius curve finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4030, HD6030, HD6031 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Single Branch - Radius curve with access finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4032, HD6032, HD6033 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 69° Double Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4035 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 45° Double Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4036, HD6036, HD6037, HD8036 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Double Branch - radius curve finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4038, HD6038 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Access pipe - round door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4043, HD6043 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Access pipe - rectangular door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4049, HD6049, HD8049, HD10049 & HD12049 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Pipe Taper finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD6048, HD8046, HD8047, HD10046, HD10047, HD10048, HD12046, HD12047 & HD12048 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Trap - with bottom access finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4050, HD6050 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Blank end finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4051, HD6051, HD8051, HD10051 & HD12051 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Blank end - drilled and tapped finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4052, HD6052 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.