Products
-
Below Ground Double Spigot Pipe finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4001, HD6001, HD8001, HD10001 & HD12001 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Ductile Iron Coupling finished externally in a two part grey epoxy coating.- Two piece coupling manufactured from ductile iron BS EN 1563
- Zinc plated socket cap locking screw and nut M8 for 100 – 300mm (6mm Allen Drive)
- 2 locking screws on 100mm and 4 locking screws on 150mm - 300mm dia’s
- EPDM synthetic rubber sealing ring
- Pressure rating up to 0.5 bar unrestrained
- Below ground soil couplings coated in 2 part epoxy finish grey colour
-
Below Ground 45° Short Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4005, HD6005, HD8005, HD10005 & HD12005 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Single-piece casting manufactured from Ductile Iron BS EN 1563- Two EPDM sealing gaskets
- Uses the same grub-screw continuity system as proven on our Ductile Iron Couplings
- Meets Hydrostatic test pressures
- Couplings in 2-part epoxy finish to match the applicable system
- Suitable for re-use (Gasket should be checked before re-installation for damage/distortion and replaced if necessary)
-
Below Ground 30° Short Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4006, HD6006 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 15° Short Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4007, HD6007 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Long Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4008, HD6008 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 22° Long Radius Bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4009 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Long Radius Bend - Door Back finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4011, HD6011 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Long Radius Bend - Heel Rest finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4014, HD6014 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 45° medium radius bend finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4015, HD6015 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 69° Single Equal and Unequal Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4025, HD6023 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 45° Single Equal and Unequal Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4028, HD6026, HD6027, HD8026, HD8027, HD8028, HD10028 & HD12028 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Single Branch - Radius curve finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4030, HD6030, HD6031 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Single Branch - Radius curve with access finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4032, HD6032, HD6033 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 69° Double Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4035 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 45° Double Branch finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4036, HD6036, HD6037, HD8036 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground 88° Double Branch - radius curve finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4038, HD6038 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Access pipe - round door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4043, HD6043 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Access pipe - rectangular door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4049, HD6049, HD8049, HD10049 & HD12049 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Pipe Taper finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD6048, HD8046, HD8047, HD10046, HD10047, HD10048, HD12046, HD12047 & HD12048 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Trap - with bottom access finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4050, HD6050 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Blank end finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4051, HD6051, HD8051, HD10051 & HD12051 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Blank end - drilled and tapped finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4052, HD6052 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Bellmouth gully inlet finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4070 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Bellmouth gully inlet with secured grating finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4071 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Gully inlet finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD6071 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Solid cover. Code number(s) for available products are: HD8076 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Supplied with rubber seal and screws fitted. -
Below Ground plain grating. Code number(s) for available products are: HD8077 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Puddle Flange finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4078, HD6078, HD8078, HD10078 & HD12078 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. Bolt on flange is supplied in two halves with stainless steel nuts and bolts. Designed to be bedded on "Denso" tape or similar, wrapped around the pipe to provide a watertight seal. -
Below Ground Inspection chamber - 2 Branch, Round door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4480, HD6480, HD6680 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Inspection chamber -2 Branch, Rectangular door finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4481, HD6481, HD6681 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Inspection chamber -4 Branch, Rectangular door finished externally in a two part grey epoxy coating. For more specifications please see the table below. Code number(s) for available products are: HD4482, HD6482, HD6682 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008. -
Below Ground Coated Adjustable Bracket finished externally in a two part grey epoxy coating. Code number(s) for available products are: HD4067, HD6067, HD8067 All our products are fully compliant with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008.